Crushing It in the Garage

I’ve been stock piling beers cans for too long, and running out of places to put them.  Normally this is not an issue and many crush cans with their hands or feet to save space. 

The thing is that a while back, probably a year or two ago I decided I was going to build a can crusher.  Since it was a project in the making, or a future dream I didn’t want to take that away from myself by crushing cans the old fashioned way.

A friend had told me about their plan to make a can crusher, and to be honest I don’t know if they ever finished it.  This weekend I decided it was time to make the trek to Pricess Auto to pickup what I thought I needed.

So before I headed out I jumped on YouTube and wached a bunch of can crushing videos.  I was actually surprised at how many can crushers used electric or gas powered flywheels to crush cans.  I saw one video where the builder had used a push button as the trigger and I knew that’s what I was going to be using as well.

First I had to detemine how big the pneumatic cyclinder would be, and since I had a lot of king cans kicking around I knew that the stroke had to be at least 160mm.  

Princess Auto has 150mm and 200mm cyclinders, so that narrowed the field.  For the bore size I went mid range at 40mm as it seemed reasonable that it would carry enough oomph! to crush an aluminum can.

I wasn’t sure what fitting to buy and was actually surprised at all the different types. There are M , T and V fittings. There are others but some are for 3/8″ which I didn’t think I needed (this setup is 1/4″). In the end one of the sales reps pointed me to a V fitting for connection to my compressor.

The V fitting worked, but after doing a bit of research I should have gone with an M connector as it appears that is the standard for home DIY compressor setups. If there was something to change on the parts list, I would swap the V connector for an M connector. That said, depending if the setup is industrial the connector would be T; I think V works for both.

The crusher in action..

The parts list:

Part numbers are from Princess Auto and listed for reference.

can crusher parts list
The breakdown of all the parts and the parts list.

Here is my stockpile of 475 beer cans (finally) crushed and ready to return.

And now I see cans to crush everywhere!

Comments (4):

  1. Sean Lamothe

    August 29, 2020 at 10:42 am

    Thanks for the perfect “Pandemic Project”. I really enjoyed building it, and the pure satisfaction of crushing cans effortlessly.

    Reply
    • Robin Mulloy

      August 29, 2020 at 5:07 pm

      Yeah Sean, I couldn’t stop once I started crushing cans. Now I feel like I have to do my part to rebuild my enpty can stockpile!!

      Reply
  2. Steve Scott

    August 29, 2020 at 2:31 pm

    Hey Robin, this is a great project and my kid and I are refining ours now. Just wanted to point out that your parts list points to a 3/8 plug which doesn’t fit with the 1/4 fittings (I don’t know what the right one is because I bought the wrong one πŸ™„ ), and the brackets should be the 40mm (8188419) instead of the 63mm. Thanks for putting this out there, we wouldn’t have started without your post. Spreading some positivity, love it.

    Reply
    • Robin Mulloy

      August 29, 2020 at 5:06 pm

      Thanks for the note Steve, and yes Sean also reported the error on the bracket.
      Sorry about the second trip back to Princess, I know how frustrating that is – trust me I speak from experience!! πŸ™‚

      Please post a picture or video once you have it working.

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.